wombat.ch

your Partner for Network Design and CMS

Space

myTinyGS

| Written by Super User | Print | Email | Hits: 97935
My TinyGS setup

Projekt >> tinygs.com
Optimal für eine Antenne eigenbau ist wohl eine Frequenz von 436MHz (Antenne). 
TinyGS satellites incl. Frequenz
TinyGS - first Contact




Idee 
LORA0103 TTGO LoRa32 V2.1_1.6 version 433    
IMG 3348 500x500 Uputronics | 435MHz Cubesat Filtered Preamp    
       
       
    Siretta Antenne DELTA22/X/SMAM/S/S/20 SMA-Stecker, 433MHz Stecker Delta 22   
    RS PRO Antenne SMA-Stecker, 433MHz Stecker   
    Flanschmontage für SMA --> m0ukd calculators quarter-wave-ground-plane-antenna-calculator  
       












Source/Quellen:
-
-
-
-
-
-
-
- Add a comment
Category: TinyGS

TinyGS Telegram community | published Links

| Written by Super User | Print | Email | Hits: 125346

TinyGS Telegram community | published Links

Project >> tinygs.com 

about

Device / Antenna (copy Paste from TinyGS Telegram)

What is a good antenna for tinyGS?

In general, a good antenna refers to one that can get as strong signal as possible from the satellites. Unfortunately, just like fashion, there is no single antenna fits all. There are some antennas that work well in some situations and other antennas for other situations. We have not even talking about budget yet here. While there are many antennas available in the market, some people prefer to build their own antenna, either for budgetary/availability reason or for self satisfaction reason.

However, you may start with the following antennas to try. Again, there is no guarantee that this will work for you but in general these are what most people are using as their first antennas: 		    
1. Dipole/closed dipole, a simple two elements antenna, you can build or buy:     

- Rabbit Ear (by @estbhan) https://t.me/c/1448773154/24354

    

- JPCoax (by @kreatif) https://t.me/c/1448773154/25479

    

- Modified dipole from online shop (by @PeterPA3PM) https://t.me/c/1448773154/25691 (some people reported success without modification)

    
     
     

2. Quarter Wave antenna (a.k.a Ground Plane)

    

- http://www.n1gy.com/simple-ground-plane-antennas.html

    

- https://www.amazon.com/gp/product/B086YV2QLS/

    
     

3. Mobile Antenna, usually a dual band 2m/70cm amateur mobile antenna

    

- https://www.amazon.com/Tram-1185-Amateur-Dual-Band-Antenna/dp/B0045EQUBK/

    

- https://www.amazon.com/HYS-Antennas-Dual-Band-UHF-male-Motorola/dp/B08H24P613/

    
     
     
     

There are many other antennas such as Yagi, Quadrifellar Helix (QFH), BiQuad (Zig Zag), Lindenblad, etc. But you may want to start with the first two above before going further. Hope this helps.

#antenna #goodantenna

    
     


-

Antennen
-  youtube | Circularly Polarized (CP) Antenna For LoRaWAN From Space - Fabien Ferrero (Université Côte d'Azur)
-
-
-
-

Satellite
- doi.org/10.1155/2014/904708 | Microsatellite Attitude Determination and Control Subsystem Design and Implementation: Software-in-the-Loop Approach
- ece3sat | ADCS: Attitude Determination And Control System
-
-
-
-

Space
-
-
-
-
-


Add a comment
Category: TinyGS

CubeSat | antennas |

| Written by Super User | Print | Email | Hits: 144704
- github Wiki alanbjohnston / CubeSatSim | Welcome to the AMSAT® CubeSatSim Project Wiki, the CubeSat Simulator





Sattelitte information
-
-
-
- wisa woodsat | 2021.04.21 | WISA Woodsat is also a communication experiment
-
- 
-
- 



Antennas and calculation
-
- m0ukd.com | 1/4 Wave Ground Plane Antenna Calculator
-
- youtuve | Microwave Labcast | 2020 | Lecture 06: Introduction to the Smith Chart with Examples
- youtuve | Microwave Labcast | 2021 | Wellenausbreitung: Antennen und Freiraumstrecke Teil 2
-
-






some PDF files
- PDF 2018 | The Power of Open-Source Tools for Satellite and Constellation Monitoring 
-
-
-
-
-
-
Video's
- 2020 | Antenna | Circularly Polarized Antenna For LoRaWAN From Space - Fabien Ferrero (Université Côte d'Azur)
-
-
-
-
-
-
- Add a comment
Category: CubeSat

How to remove systemd services

| Written by Super User | Print | Email | Hits: 5834
How to remove systemd services

● snapd.seeded.service masked failed failed snapd.seeded.service
● snapd.service masked failed failed snapd.service

systemctl stop [servicename]
systemctl disable [servicename]
rm /etc/systemd/system/[servicename]
rm /etc/systemd/system/[servicename] # and symlinks that might be related
rm /usr/lib/systemd/system/[servicename]
rm /usr/lib/systemd/system/[servicename] # and symlinks that might be related
systemctl daemon-reload
systemctl reset-failed Add a comment
Category: Linux

linux scripts

| Written by vincent | Print | Email | Hits: 3515
Ein paar scripte gefunden im Netz.


  #!/bin/bash

plainip="$(host $1 | grep address|grep -v IPv6| awk 'NR == 1{print $4}')"
#echo $plainip

ip=$plainip

reverse_ip=$(echo $ip | awk -F "." '{print $4"."$3"."$2"."$1}')

asn_info=$(dig +short $reverse_ip.origin.asn.cymru.com TXT)
peer_info=$(dig +short $reverse_ip.peer.asn.cymru.com TXT)

number=$(echo $asn_info | cut -d'|' -f 1 | cut -d'"' -f 2 | cut -d' ' -f 1)
asn="as$number"

asn_report=$(dig +short $asn.asn.cymru.com TXT)

subnet=$(echo $asn_info | cut -d'|' -f 2)
country=$(echo $asn_info | cut -d'|' -f 3)
issuer=$(echo $asn_info | cut -d'|' -f 4)

peers=$(echo $peer_info | cut -d'|' -f 1 | cut -d'"' -f 2)

registry_date=$(echo $asn_report | cut -d'|' -f 4)
registrant=$(echo $asn_report | cut -d'|' -f 5 | cut -d'"' -f 1)

echo -e " Query:\t $ip"
echo -e " Subnet:\t $subnet"
echo -e " Registrant:\t $registrant"
echo -e " AS Number:\t $asn"
echo -e " Country:\t $country"
echo -e " Issuer:\t $issuer"
echo -e "Registry Date:\t $registry_date"
echo -e " Peer ASNs:\t $peers"		 $ /sbin/host2ip2asn heise.de  Link 
       
       
Add a comment
Category: Linux

if ping fail do ....

| Written by vincent | Print | Email | Hits: 3916
If Ping fail do a action



  #!/bin/bash
 IP='192.168.1.1'
fping -c1 -t300 $IP 2>/dev/null 1>/dev/null
if [ "$?" = 0 ]
then
    echo "Host found"
else
    echo "Host not found"
fi		  
     
 

ping -c4 10.18.23.1 > /dev/null

if [ $? != 0 ]
then
echo "No network connection, restarting wlan0"
/sbin/ifdown 'wlan0'
 sleep 5
 /sbin/ifup --force 'wlan0'
 fi

  
     
will check the feedback 0 or 1 ping 10.147.42.63 ; echo $?  
     
  #   vi /usr/local/bin/vm162restart.sh  
  #!/bin/bash
IP='192.168.1.1'

ping -c4 $IP > /dev/null

if [ $? != 1 ]

then
    echo "Host found"
else

echo "host not found - restart...."
   qm reset xxx
   qm resume xxx
   qm start xxx
fi 		  
  #   chmod +x /usr/local/bin/vm162restart.sh  
     
     
  #!/bin/bash

status_code=$(curl --write-out %{http_code} --silent --output /dev/null www.bbc.co.uk/news)

if [[ "$status_code" -ne 200 ]] ; then 
      echo "Site status changed to $status_code" | mail -s "SITE STATUS CHECKER" "This email address is being protected from spambots. You need JavaScript enabled to view it." -r "STATUS_CHECKER"

else
      exit 0

fi 		  
  url='http://localhost:8080/'
status=$(curl --head --location --connect-timeout 5 --write-out %{http_code} --silent --output /dev/null ${url})
[[ $status == 500 ]] || [[ $status == 000 ]] && echo restarting ${url} # do start/restart logic 		  
     
Add a comment
Category: Linux

Alias | linux

| Written by vincent | Print | Email | Hits: 4609

 Alias show all aliases
alias ls='ls -F --color=auto --show-control-chars'
alias synth='echo secretpw | pbcopy; sftp This email address is being protected from spambots. You need JavaScript enabled to view it.'      
Add a comment
Category: Linux
  1. problems with nextcloud
  2. VI & VIM basics
  3. Linux | CLI Email
  4. Linux some basic commands
  5. Linux upgrade problems
  6. uname | welches Linux - Kernel - nodename
  7. Crontab |
  8. rename file
  9. mount & fstab
  10. clamAV
  11. Find in LXC Container
  12. howto: start, stop, restart Services
  13. DHCP Server Konfig
  14. sysctl
  15. LINUX MALWARE DETECT (LMD) INSTALLIEREN
  16. ~ Tilde Symbol
  17. meldung an server root als email weiterleiten
  18. ADMIN-Tipp: Der Server stellt sich taub
  19. ADMIN-Tipp: Kolorierte Logs
  20. ADMIN-Tipp: Traceroute mit TCP
  21. ADMIN-Tipp: DHCP-Server testen
  22. Ubuntu 13.10 - Laptop Problem
  23. php.ini anpassen
  24. DNS Funktionskontrolle
  25. LTS (Long Term Support)
  26. aptitude - Befehle
  27. Linux ubuntu - static IP adress and IPv6
  28. Linux Ubuntu - Server Upgrade
  29. Ubuntu Linux Shortcut
  30. ipkg Befehle
  31. IPKG List of Software
  32. nextcloud http to https
  33. Wie Viele Sekunden hat eine Stunde

last modified

Perfect Server

neusten Nachrichten

Hardware

lamp

RSS Feed


Warning: Invalid argument supplied for foreach() in /var/www/clients/client2/web2/web/j/modules/mod_jw_srfr/helper.php on line 39

Warning: Invalid argument supplied for foreach() in /var/www/clients/client2/web2/web/j/modules/mod_jw_srfr/helper.php on line 39

neusten Links


Warning: count(): Parameter must be an array or an object that implements Countable in /var/www/clients/client2/web2/web/j/modules/mod_quicklistweblinks/helper.php on line 78
many More Links »

part of ...

Linux Counter
Schweizer Informatik Gesellschaft SI
Internet Society
FairPhone
swissIPv6Concil
Linux Counter

Disqus

 

Learning Network

Cisco Learning Network
Linux Professional Institute (LPI)

Seti@home & Boinc

myBonic

statistik

 

Who is Online

We have 512 guests and no members online

We have 517 guests, 2 bots and no members online

2 bots:
2 x BOT for JCE

Designed by Vincent Kocher.