Perfect
I have the following Hardware and would like to use Proxmox for virtualisation.
I have 2 Nic Port Eth0 and Eth1
i have a Cisco-Switch and Fritzbox as Switch and Router
the Cisco-Switch is also conected to the router
Router -------------- Server
Router --- Switch --- Server
i would like
to bundle Eth0 and Eth1 to share bandwith
as i found out it would be a Bond (what is the difference between OVS Bond and Linux Bond?)
I would like
to use IPv6 Adresse for this Container which should be reached bei outside.
Download a ISO file burn a CD, a USB Stick what work for the installation he is asking for cd and the Installation will hang....
At a point you will be asked to give a
Servername, IP, Subnetmask, Gateway, Domaine, Password ...
After a reboot you can start with https://yourIP:8006 (Example you have to use your one defined IP Adresse)
and Login with root and your password
i have done a Linux Bond0 LACP Mode and after a reboot which i had to do, i could not conect any more. Why?
and what is the difference:
Linux Bond Mode
- balance-rr
- active-backup
- balance-xor
- broadcast
- LACP (802-3ad)
- balance-tlb
- balance -alb
and what is a Slaves:?
> Add a comment >
Install Adaptec 6405E and Monitor with Munin
doch vorher adaptec 6405E - Wo muß das graue Sideband - Kabel angeschlossen werden
Install APC UPS Pro 900 and Monitor with Munin
my Setup
Verbinden des APC UPS Pro 900 mit dem Linux Server (Debian 7.5 wheezy)
APC UPS Pro 900 hat einen RJ45/Seriellen Port
Server auf ein USB Port
Check it mit
# lsusb Bus 003 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply |
dann noch mehr Infos
# lsusb -v -s003:002 Bus 003 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply |
es kommen noch mehr Infos ... sind aber nicht relevant wir wissen das eine kommunikation stattfindet
# apt-get update # apt-get upgrade # apt-get install apcupsd |
Dann muss die Datei apcupsd.conf angepasst werden
# vi /etc/apcupsd/apcupsd.conf |
dabei sind die 3 Punkte wichtig:
UPSName deineUSVname
UPSCable usb
UPSTYPE usb
# vi /etc/default/apcupsd |
anpassen von ISCONFIGURED von no auf yes wechseln
# /etc/init.d/apcupsd start # apcaccess |
und weitere Infos....
=================== ====
APC UPS Status mit Munin überwachen
Munin-node ist bereits installiert und läuft
vi |
no you could be changeing the name of the UPS .....
sudo ln -s /usr/share/munin/plugins/apcupsd_pct /etc/munin/plugins/apcupsd_pct |
cd /etc/munin/plugins/ ./apcupsd_pct ./apcupsd_volt ./apcupsd_time ./apcupsd_pwr
--- :/etc/munin/plugins# ./apcupsd_time ---
|
/etc/init.d/munin-node restart |
more Information Links:
apcupsd - Debian Wiki
apcupsd - Community Help Wiki
Official website
> Add a comment >
VMWare ESXI 5.5
Realtek RTL 8111E Ethernet Netzwerk-Controller
---
Links: dev-random.net; v-front.de (ISO Builder); tinkertry.com; twistedethics.com
> Add a comment >
Vorzüge
Read more: Adaptec 6405E RAID-Adapter
Basic: Debian Linux
Quelle: Install on Debian
and more: HOWTO: Multi-Domain Support in Kolab
> Add a comment > The Network Time Protocol daemon (ntpd) is an operating system daemon program that maintains the system time in synchronization with time servers using the Network Time Protocol (NTP).
Quellen: - openNTPD - - > Add a comment > SubcategoriesMonitoring Article Count: 69Roundcube Article Count: 1
Roundcube ist eine freie Software für Webmail über IMAP, die in den Programmiersprachen PHP und JavaScript entwickelt wird. Roundcubes prominenteste Features sind die schlanke und moderne Benutzeroberfläche und die ausgeprägte Nutzung der Ajax-Technologie, die einen ähnlichen Bedien-Komfort wie bei einer lokal installierten Anwendung ermöglicht.
Kolab News Article Count: 33soho Net Article Count: 4Perfect NAS Article Count: 28Perfect Server Article Count: 80Perfect Router/FW/Switch Article Count: 4
|