Software Information

You are here: Home

Sensor&Aktor-list

Perfect

Software Information

Icinga2 | add Raspberry Pi (Debian9)

Created: 02 August 2018 | Written by vincent | Print | Email | Hits: 6046

Icinga2 |add Raspberry Pi (Debian9)


	object CheckCommand "by_ssh_apt" { import "by_ssh" vars.by_ssh_command = "/usr/lib/nagios/plugins/check_apt -w $by_ssh_apt_warn$ -c $by_ssh_apt_crit$" vars.by_ssh_apt_warn = "75%" vars.by_ssh_apt_crit = "50%" } apply Service "by_ssh_apt" { import "generic-service" host_name = "10.147.42.32" check_command = "by_ssh_apt" vars.by_ssh_logname = "pi" }

QUellen/Source:
- docs/icinga2/latest/doc/07-agent-based-monitoring/#ssh
- remote-sensor-raspberry-pi-locale-temperature-monitoring-snmp-and-cacti
-
-
-
-
-
-
-
-
- monitoring-portal.org
_

modul-icinga-articlelist

Add a comment

Category: Icinga

Icinga2 | add service to a hostgroup

Created: 27 July 2018 | Written by vincent | Print | Email | Hits: 5144

add a service to a hostgroup

i have a couple of Debian 9 "Server/Host/Client" they all should have some Basic Service Check like (apt, disk, mem, swap, procs, users, running_kernel, apt, ssh, iostat, ping4, fping4, tcp, udp, ssl, ntp_time)

because i don't want to add this check to each host i did define a hostgroup and add the hostgroupname to the host (--> "define Hostgroup & add Host to a Hostgroup")

Merci to rsx (Roland)

steps i have done...	icinga2 Master
went to the zone.d	# cd /etc/icinga2/zones.d/
crate a new directory	# mkdir services
went to the new directory	# cd /services or # cd /etc/icinga2/zones.d/services
open a new file	# vi service2debian9.conf
to check apt on all defined Debian 9 "Host/Server/Client"	apply Service "apt" { import "generic-service" check_command = "apt" assign where host.address && host.vars.os == "debian9" command_endpoint = host_name }
to Check swap	apply Service "swap" { import "generic-service" check_command = "swap" assign where host.address && host.vars.os == "debian9" command_endpoint = host_name }
Check it if it for error	# icinga2 daemon -C
if ok	# systemctl restart icinga2

---

Sometimes all would be perfect but a Service is on a Host not needed or not available. so you will get a error. to avoid the error - just ignore the host like this	32 apply Service "swap" { 33 import "generic-service" 34 check_command = "swap" 35 36 assign where host.address && host.vars.os == "debian9" 37 ignore where host.name == "memoryalpha.kozo.ch" 38 command_endpoint = host_name 39 }
	# icinga2 daemon -C
	# systemctl restart icinga2

---

Quellen/Source:
- 05-service-monitoring/#general-monitoring
- have a look and for my test
-
-
-
-
- Add a comment

Category: Icinga

Icinga2 | add Supermicro IPMI

Created: 09 July 2018 | Written by vincent | Print | Email | Hits: 7526

Icinga2 | add Supermicro IPMI
for the spez Plugin path --> Icinga2 | (spez)Plugins | define path

working on Icinga2 (version: r2.9.1-1)

	Supermicro backend	Add a user with some right user icinga2 pwd icinga24

steps	on Icinga2

	# arp -n \| grep 0c:c4:7a:ee:42:1c \| awk '{print $1}'	this is the IP of the IPMI Port (the Eth.Port has DHCP)

	`apt install -y libipc-run-perl`

	wget http://ftp.gnu.org/gnu/freeipmi/freeipmi-1.6.2.tar.gz tar xzvf freeipmi-1.6.2.tar.gz cd freeipmi-1.6.2 apt install -y build-essential libgcrypt11-dev ./configure make make install ldconfig

1	# cd /usr/lib/nagios/pluginsCustom
	# wget https://raw.githubusercontent.com/thomas-krenn/check_ipmi_sensor_v3/master/check_ipmi_sensor
	# chmod +x check_ipmi_sensor

b	./check_ipmi_sensor	Can't locate IPC/Run.pm in @INC (you may need to install the IPC::Run module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/x86_64-linux-gnu/perl5/5.24 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at ./check_ipmi_sensor line 35. BEGIN failed--compilation aborted at ./check_ipmi_sensor line 35.
c	curl -L http://cpanmin.us \| perl - -- App::cpanminus cpanm --with-recommends --force IPC::Run
	./check_ipmi_sensor



	# icinga2 daemon -C
	# systemctl reload icinga2
	# systemctl restart icinga2
	# multitail /var/log/icinga2/icinga2.log

-
-

Source/Quellen:
-
- thomas-krenn | IPMI Sensor Monitoring Plugin
- thomas-krenn | FreeIPMI
- thomas-krenn | IPMI Konfiguration für Supermicro Systeme
-
-
-
-
-
-
-

modul-icinga-articlelist

Add a comment

Category: Icinga

Icinga2 | add USV/UPS

Created: 09 July 2018 | Written by vincent | Print | Email | Hits: 4685

Icinga2 | add USV/UPS

Source/Quellen:
-
- Monitoring einer USV mit check_apcupsd am USB-Port
- Raspberry Pi / Rasbian und SNMP
-
-
-
-
-
-
- Add a comment

Category: Icinga

Icinga2 | check_logfiles

Created: 25 August 2018 | Written by vincent | Print | Email | Hits: 6027

Icinga2 | check_logfiles
for the spez Plugin path --> Icinga2 | (spez)Plugins | define path
working on Icinga2 (version: r2.9.1-1)

steps	on Icinga2
1	# cd /usr/lib/nagios/pluginsCustom
	# mkdir check_logfiles
	# cd check_logfiles

	# wget https://labs.consol.de/assets/downloads/nagios/check_logfiles-3.9.tar.gz
	# tar zxvf check_logfiles-3.9.tar.gz
	# cd check_logfiles-3.9
	./configure make make install


	# chmod +x



b	vi gesuelze.cfg
	1 @searches = ({ 2 tag => '0815', 3 logfiles => '/var/log/messages', 4 criticalpatterns => '.0815.', 5 rotation => 'debian', 6 options => 'noprotocol' 7 });

	./check_logfiles -f gesuelze.cfg
	# ./check_logfiles -f gesuelze.cfg Use of uninitialized value $_[0] in substitution (s///) at /usr/share/perl/5.24/File/Basename.pm line 180. fileparse(): need a valid pathname at ./check_logfiles line 2632.




	# icinga2 daemon -C
	# time systemctl reload icinga2
	# time systemctl restart icinga2
	# multitail /var/log/icinga2/icinga2.log
c