OPNSense | Add WLAN Interface

| Written by Super User | Print | Hits: 9195
View Comments

Add WLAN Interface (IP Adressen entsprechend anpassen)
OpnSense Version

OPNsense 17.7.12-amd64
FreeBSD 11.0-RELEASE-p17
LibreSSL 2.6.4

  Interface - Wireless - Device +add
[Description]		  
   Interface - Assignments select network Port and Press +
select the Interface Name crated		  
    General configuration
Enable Interface
Descritpion [WLAN]
IPv4 Configuration Type [static IPv4]
  
    Static IPv4 configuration
IPv4 address [10.20.20.1]/24		  
   

Common wireless configuration -
Settings apply to all wireless networks on ath0
Standard [802.11ng]
Regulatory settings
County [select]
Location [Indoor]

  
    Network-specific wireless configuration
Mode [Access Point]
SSID [name des Signal]
WPA [x] Enable WPA
     WPA Pre-Shared Key [passowrt]
WPA Mode [WPA2]		  
save & Apply Changes      
System - Gateways - All +add gateway
Interface [WLAN]
Name [GW_WLAN]		  
Services - DHCP - Server
(Select the WLAN Tab)!!!		 Enable [x]
Range add from to
DNS Server [add IP]		  

 

 

---

Category: OPNSense